20H SYSTEM CAD Details:
***Note: The 20H SYSTEM has been largely replaced for deck joint applications by the DSM SYSTEM.
With its introduction in 2006 the DSM SYSTEM supersedes it's predecessors, 20H SYSTEM and DSH SYSTEM, in most applications. The DSM SYSTEM builds on a track record of over 30 years of sealing horizontal plane joints with impregnated foam sealants and is an evolution of EMSEAL’s earlier technologies. The DSM SYSTEM features greater movement capability, dual sealing, a fuel resistant silicone bellows coating, better low temperature flexibility, and improved high temperature stability. It achieves these improvements through EMSEAL’s new microsphere-modified-acrylic impregnation technology and is free of any asphalt compounds. Additionally, the DSM SYSTEM is totally free of wax or wax compounds. Consequently the suitability of the DSM SYSTEM is extended geographically as well as to applications such as in metal-angles, and top-decks previously not recommended for joint-face-adhered systems.
The 20H SYSTEM continues to be well-suited for installations in below-grade, positive-side wall joints***
|
These drawings are intended for use during the specification of EMSEAL products in legitimate Architectural, Engineering and Construction applications. Any misuse or duplication of these copyrighted details for any other purpose, will be vigorously prosecuted. |
|
|
||
|
Meet online now:
|
|
Expansion joints and precompressed joint sealants by EMSEAL
1-800-526-8365 -- 508-836-0280 --
techinfo@emseal.com
-- Fax: 508-836-0281
Last Modified:
April 11, 2012 |