www.emseal.com

EMSHIELD WFR2
UL 2079 Tested and Certified

Click Here for the UL and ULC Directory Listing Index on emseal.com

UL Listings on UL's sites:
UL System WW-D-0091
Concrete Walls
1 to 2 inch (25 - 50mm)

UL System WW-D-0092
Gypsum Walls
1  to 2 inch (25 - 50mm)

UL System WW-D-1079
Concrete Walls
2.25  to 6 inch (55 - 150mm)

UL System FW-D-1081
Gypsum Walls
2.25  to 6 inch (55 - 150mm)

ULC System JF131
Concrete Walls
1 to 6 inch (25 - 150mm)

ULC System JF132
Gypsum Walls
1 to 6 inch (25 - 150mm)

See available colors

Also Available
for Decks...

EMSHIELD DFR2
Watertight
Traffic-Grade
2-Hour Fire Rated
Deck Expansion Joint
(Learn about DFR2)

Watertight, Energy-Efficient 2-Hour Fire-Rated Expansion Joint For Concrete and Gypsum Walls

EMSHIELD WFR2 is a watertight, fire-rated, dual-sided primary seal for both new and retrofit structural expansion joints in wall applications. As a single unit fire-rated expansion joint it eliminates the need for additional fire stops at the joint gap thereby eliminating the need for multiple separate products that perform the roles of sealing, bridging and fire-rating joints--with EMSHIELD WFR2, one install does it all.

For joints from 1 to 6-inches (25-150mm) where +25% and -25% (total 50%) of nominal material size joint movement is expected.

EMSHIELD WFR2 (Wall, Fire-Rated 2-Hours) is the second in a series of fire-rated expansion joints being released by EMSEAL. It can be joined with EMSHIELD DFR2, EMSEAL's horizontal deck fire-rated expansion joint, to create a continuous, fire-rated watertight expansion system in both planes as well as at factory-fabricated direction changes between the horizontal and vertical planes.

EMSHIELD WFR2 builds on EMSEAL's track record of over 30 years of innovation in sealing structural expansion joints with impregnated foam sealants and expands the comprehensive line of breakthrough, multi-function, structural expansion joint materials being released by EMSEAL. It has been tested and certified by Underwriters Laboratories (UL), to the rigors of UL 2079.

The fire-retardant-impregnated foam is factory pre-coated on both inside and outside sides with an intumescent fire-proofing material. Each side is then coated with a silicone coating.  This silicone coating is offered in a choice of 12 standard (and additional custom) colors to coordinate with the surrounding wall colors. The resulting composite is then factory compressed to less than its nominal size for installation into structural or other openings. 

Because EMSHIELD WFR2 is coated on both sides it is an effective fire-barrier from either side in interior demising walls or partitions.  Installed in exterior joints WFR2 can help to prevent wrap-around fires that exit the building through joint openings, wrap around the outside of the building and reenter the building through the joint at the next floor level.

EMSHIELD WFR2 provides a watertight, clean handling, UV stable, non-staining, low-temperature-flexible, high-temperature-stable, watertight, energy-efficient and fire-rated joint seal in a single installation process.

Uses For expansion joints in walls and vertical structures where watertightness and/or a fire-rating and/or energy-efficiency are required.  Applications examples are:

• Fire-Rated Walls • Interior or Exterior Walls • Stadiums • Hospitals • Stair Towers • Elevator Towers • Wall-to-Deck (with DFR2) • Arenas Can be used alone or behind any other expansion joint cover, plate or filler.

Product Description EMSHIELD DFR2 features a dual-sided silicone sealing surface adhered to a fire-retardant impregnated foam backing and an intumescent bellows. Both sides of the expansion joint are waterproof and fire-rated. The silicone faces of EMSHIELD WFR2 are available in a choice of colors. SEE COLOR SELECTION

The system is installed into epoxy adhesive field-applied to the joint faces.  A field-injected silicone sealant band seals the bellows to the substrate. Joins between each stick are executed using a field-applied silicone sealant band at the join and an intumescent sealant coating over the remaining foam at the adjoining faces.                                           Colors EMSHIELD WFR2 is manufactured with the choice of 12 standard colors for the bellows and silicone on both sides. The example above shows Rustic Brick bellows facing the exterior of the building and Sandstone facing the interior. Both were chosen to be color coordinated with the walls in which they were placed. More color information.

Figure 1: EMSHIELD WFR2 in Typical Wall-to-Wall Installation

Figure 2: EMSHIELD WFR2 in Wall-to-Corner Installation

Figure 3: EMSHIELD WFR2 in Fireproof Block Installation

Figure 3: EMSHIELD WFR2 in Interior Fire-proof Gypsum Wall Installation

Features Watertight — EMSHIELD WFR2 is installed with the tensionless bellows facing the exterior elements ensuring that watertightness is achieved. Fire-Rated — The fire-retardant-impregnated foam and intumescent bellows on both the interior and exterior faces work together to ensure 2-hour fire protection in accordance with UL-2079. Non-Invasive Anchoring — There are no hard metal-to-substrate connections with EMSHIELD WFR2. This includes embedded pins, anchors, screws, bolts or tracks, trays or rails, flanges or coverplates. The system is locked to the joint faces by means of the 1) backpressure of the foam; 2) the epoxy adhesive, and 3) the injected sealant bands at the joint face. Versatility — EMSHIELD WFR2's visible surfaces are available in 12 standard colors (other colors are optional). Each side can be a separate color. This allows for color coordination with surrounding wall colors and in keeping with the structure's aesthetics. SEE COLOR SELECTION Joint-Size Variation —Uniform bellows appearance, and the ability to handle variations in joint size through size-switching. Energy Efficiency -- EMSEAL's foam technology also acts an efficient thermal barrier.  This means that indoor air quality and HVAC balance can be controlled while insulating the interior space from hot and cold exterior conditions.  The non-metallic, non-invasive anchoring means that with WFR2 there are no thermal breaks introduced at structural or other joint openings.   Sound Attenuation -- Walls sealed with EMSEAL impregnated foam sealants offer exceptional acoustic dampening and feature sound transmission coefficients virtually equal to that of the solid wall. In a wall with a STC 68 rating, WFR2 was tested to have a STC 62 rating thereby maintaining the sound suppressing capabilities of the host wall. It also posted an OITC 52 rating.

Factory-Fabricated Transitions— as in all EMSEAL expansion joint systems, continuity of seal through changes in plane and direction is an essential performance differentiator. EMSHIELD WFR2 is manufactured in straight-run sticks which can be joined in the field to EMSEAL’s patent-pending DFR2 "Universal-90" Transitions . Universal-90 Upturn Transition Universal-90 Flipped-Over as Downturn Transition These factory-fabricated single-piece 90-degree units have a 6-inch long leg and a 12-inch vertical piece on each end of the elbow.  Custom-90's are also offered with varying leg lengths manufactured for specific installations. Universal-90's are symmetrically coated on both sides.  This allows them to be installed as an upturn or as a downturn.  Either leg can be trimmed in the field to connect to straight run material or to another Universal-90 when going, for example, up and over a curb, into a parapet, or up and down treads and risers. In addition to guaranteeing a continuous waterproof coating, and continuity in the fire barrier, EMSEAL’s "Universal-90's" allow for much faster and secure installation by eliminating field cutting or notching and bending at angles.

Performance Sizing Movement Capability: +25%, -25% (50% total) of nominal material size. Standard sizes from: 1" to 6" (25-150mm) Depth of Seal for all sizes: 4" (100mm).  Note: Typical Thickness of concrete for 2-hour rating = 4" (100mm). Substrates must be solid, sound, parallel and plumb. Note: Overall fire-rating of a wall assembly is dependent on the fire-rated characteristics of the supporting and adjacent wall design by others. Supplied Product  Nominal Material Size Depth of Length Code ( = Joint Size at Mean T) Seal 6.56 LF (2M) WFR2-100-100-02 1"  (25mm) 4" (100mm) Stick WFR2-125-100-02 1 1/4" (30mm) 4" (100mm) WFR2-150-100-02 1 1/2" (40mm) 4" (100mm) WFR2-175-100-02 1 3/4" (45mm) 4" (100mm) WFR2-200-100-02 2" (50mm) 4" (100mm) WFR2-225-100-02 2 1/4" (55mm) 4" (100mm) WFR2-250-100-02 2 1/2" (65mm) 4" (100mm) WFR2-275-100-02 2 3/4" (70mm) 4" (100mm) WFR2-300-100-02 3" (75mm) 4" (100mm) WFR2-325-100-02 3 1/4" (85mm) 4" (100mm) WFR2-350-100-02 3 1/2" (90mm) 4" (100mm) WFR2-375-100-02 3 3/4" (95mm) 4" (100mm) WFR2-400-100-02 4" (100mm) 4" (100mm) WFR2-425-100-02 4 1/4" (105mm) 4" (100mm) WFR2-450-100-02 4 1/2" (115mm) 4" (100mm) WFR2-475-100-02 4 3/4" (120mm) 4" (100mm) WFR2-500-100-02 5" (125mm) 4" (100mm) WFR2-525-100-02 5 1/4" (130mm) 4" (100mm) WFR2-550-100-02 51/2" (140mm) 4" (100mm) WFR2-575-100-02 5 3/4" (145mm) 4" (100mm) WFR2-600-100-02 6" (150mm) 4" (100mm)

Colors 12 Standard colors are available (consult EMSEAL for custom color options).

Testing and Standards EMSHIELD WFR2 has been tested and certified under UL 2079 encompassing manufacturing certification, Class II and Class III movement cycling, fire test, and hose stream test. EMSHIELD WFR2 meets the requirements of ASTM E1966, ASTM E119 and ASTM E1399. UL 2079, like ASTM E1966, was developed to encompass the fire testing of ASTM E119 and the movement cycling regime of ASTM E1399. EMSEAL’s EMSHIELD WFR2 has been tested in accordance with UL 2079 in the configuration depicted in System # WW-D-0091; System # WW-D-0092; System # WW-D-1079; System # WW-D-0081. Use of this material in wall assembly configurations other than allowed under UL System # WW-D-1079 or UL System # WW-D-1081 will not encumber or lower the resistance of the wall but is done so at the designers’ discretion and responsibility for design of a fire rated wall assembly that meets applicable standards for the project and which additionally is capable of resisting the approximately 2.5 psi (120 lbs per foot of joint based on 4-inch depth of seal) backpressure of the WFR2 material. This short video summarizes the rigors of the UL 2079 testing process for EMSHIELD WFR2:

Member:

Sealant Waterproofing and Restoration Institute

Construction Specifications Canada

Expansion joints and precompressed joint sealants by EMSEAL

1-800-526-8365 -- 508-836-0280 --  techinfo@emseal.com -- Fax: 508-836-0281
 

Copyright © 1998-2010 by EMSEAL Joint Systems, Ltd. All rights reserved.
This document may not be reproduced in whole or in part without permission.